Genesee Adjustable
Hollow Mill Blade
Positive Rake

Note: Standard Tip Forms may vary from above illustration.

SPECIFICATIONS OF CARBIDE TIPPED GENESEE ADJUSTABLE HOLLOW MILL BLADES
FOR MILLS WITH BLADES SET AT RAKE ANGLE
A Cutting Edge Carbide Dimensions Catalog Number
HSS Blade
Catalog #
Number
Per Set
Length
(L)
Width
(W)
Grade for
Steel
Grade for Cast Iron
Non-Ferrous Metals
M11-4 4 5/16 3/16 M11-4CM M11-4CM
X11-4 4 5/16 3/16 X11-4CM X11-4CM
BM17-4 4 3/8 11/32 BM17-4CM BM17-4CM
X17-4 4 3/8 11/32 X17-4CM X17-4CM
T17-4 4 3/8 11/32 T17-4CM T17-4CM
T17-5 5 3/8 11/32 T17-5CM T17-5CM
MD23-4 4 3/8 11/32 MD23-4CM MD23-4CM
X23-4 4 3/8 11/32 X23-4CM X23-4CM
E23-3 3 7/16 13/32 E23-3CM E23-3CM
BM23-4 4 7/16 13/32 BM23-4CM BM23-4CM
T23-5 5 7/16 13/32 T23-5CM T23-5CM
T23-6 6 7/16 13/32 T23-6CM T23-6CM
T23-8 8 7/16 13/32 T23-8CM T23-8CM
E28-3 3 1/2 1/2 E28-3CM E28-3CM
B28-4 4 1/2 1/2 B28-4CM B28-4CM
B28-5 5 1/2 1/2 B28-5CM B28-5CM
E35-3 3 1/2 3/4 E35-3CM E35-3CM
E35-4 4 1/2 3/4 E35-4CM E35-4CM
E47-4 4 1/2 3/4 E47-4CM E47-4CM

A PART PRINT IS REQUIRED FOR SPECIAL TOOL QUOTATIONS.