Genesee Manufacturing Company, Inc.



INDI-SQUARE CO., INC. is a subsidiary of Genesee Manufacturing that offers unique squareness and vertical straightness instruments. With an exclusive, proven anti-friction lifetime sliding mechanism, these instruments rapidly indicate squareness and straightness with a minimum of effort and a maximum of accuracy.

INDI-SQUARE has been manufacturing precision squareness measuring instruments at our manufacturing location in Rochester, New York since 1960. INDI-SQUARE instruments are used by manufacturers and machine tool builders industry wide in inspection departments and tool rooms. Because they are portable, they are easily used on the shop floor for checking in process work at production setups or on large parts themselves.

(Model 8) and (Model 18) INDI-SQUARES are simple to use, allowing you to rapidly check the squareness and straightness of surfaces to .00005 over 9" of travel and .0001 over 18" of travel.

INDI-SQUARE measuring instruments are durable. No lubrication or special maintenance is required. They are warranted for a one year period. If damaged or broken, they may be repaired at the factory and returned with a new "Certificate of Repair and Calibration" and a new full one-year warranty.

  • Simple to use
  • Immediate, accurate reading
  • Unlike conventional friction slides, there is no wear incurrent on the column of the INDI-SQUARE due to the anti-friction gaging head
  • Fully adjustable
  • Exclusive locking eccentrics for column adjustment. Tamper proof.
  • Design allows for expansion or contraction of gaging column without affecting accuracy.
  • Excellent mobility only 32 pounds for Model 18; 11 pounds for Model 8
  • No lubrication required. No maintenance or problems of dirt and dust attraction

There are hundreds of possible inspection and checking jobs where INDI-SQUARES provide the simple, fast, economical and accurate solution. Use INDI-SQUARE to check:

  • Squareness or straightness in cavities, slots, recesses and other hard to reach spots.
  • Squareness of in line bored holes, also perpendicularity and straightness of vertical surfaces on the same part, all in one setup.
  • Squareness, straightness and parallelism of adjacent planes.
  • Perpendicularity, parallelism and straightness of intermittent surfaces.
  • Squareness of work piece setup on machine
  • Squareness and/or straightness of large parts right on your production line.
  • Horizontal surface straightness by moving the instrument on surface plate.
  • Inside faces and adjacent surfaces for squareness, straightness and parallelism, all in one step
For more information contact:

Genesee Building
566 Hollenbeck Street
Rochester, NY 14621 USA
Telephone: (585) 266-3201 · Fax: (585) 266-4499

Click on the image for a more detailed view.